44x 15kg LIQUID FOIL Waterproof Tanking Membrane
- Product Code: 44x 15kg Liquid Foil
- Availability: In Stock
Full pallet 44 units of 15kg AQUA BUILD - LIQUID FOIL Waterproof Tanking Membrane
£29.99 per 15kg bucket
£1319.56 including VAT and delivery to London area. Please contact us for delivery costs to other areas.
For use before tiling
* Kitchen * Ready-to-use
* Bathroom * Watertight
* Shower * Flexible
* Cellar * For Indoor and Outdoor use
* Wet room * Solvent Free
LIQUID FOIL is a ready to-use one-component elastic sealing compound for waterproofing internal and external walls and ceilings. Especially terraces, walls, buildings sunk into the ground, retaining walls, ceilings, garages seals, insulation under the tiles on balconies and terraces. It is particularly useful as insulation for gypsum boards, which will be covered with ceramic tiles.
LIQUID FOIL is a high quality mixture of polymeric binder, mineral fillers and modifying agents. The applied putty impermeable to water after drying. Fills hairline cracks in the substrate. It has excellent adhesion to most materials. Reduces the risk of crack formation in lining materials, as a result of different thermal expansion of the substrate and the cladding, such as ceramic tiles. When dry, it is freeze-resistant.
Surface preparation and application:
Apply to the substrate that is clean, sound and free of dust, dirt, debris and paint remains and grease.Fill cracks and holes. For porous surfaces, such as aerated concrete, it is recommended coat of ACRYLIC PRIMER or DEEP PRIMER PRO in order to reduce the absorbency of the substrate. Strenghten the corners and joints with elastic tape, blending the edges in Izolanit.
Mix contents thoroughly before use. Next, apply the material onto the prepared substrate using a brush or mason brush, in two layers. Apply the second coat after the previous dries (about 3 hrs.). Fresh plaster and cement floors can be sealed, after at least 28 days from the time the application.
Protect surfaces covered with LIQUID FOIL against mechanical damage and rain until completely dry. Clean tools with water immediately after use.
Store the product in closed original packaging. The manufacturer is not liable for misuse of the product or not following instructions on the packaging.
appearance: blue semi-liquid putty,
used and stored at air and ground temperatures of: from 5 to 30°C (also applies to drying),
full mechanical strength after 3 days
interval between the application of the last layer and laying tiles min. 24 hours.,
water exposure after 7 days of application.
density: about 1.5 g/cm3,
consumption: 1.1 kg / m2 with a total thickness of 2 layers: 1 mm,
12 months warranty from date of manufacture on the original sealed packaging