10m² Matting Shower Waterproofing Kit

3-ply waterproof membrane protects floors and walls under thin-set tile installations from substrate cracks and moisture migration.  

Sealing membrane to be applied under ceramic tiles and flagstones has excellent waterproofing properties. Suitable for example for the following typical areas: domestic bathrooms, commercial kitchen, public and domestic shower rooms & wet areas. The sealing membrane can also be applied on outside balconies and terraces where no living space is situated underneath. If applied with suitable adhesives or sealants it meets the requirements of higher moisture stress classification (e.g. swimming pools)  

Substrate: Two outer layers of polypropylene spunlace  

Membrane: One inner layer of polyethylene waterproofing membrane   

Colour ……………………………………………………………………………….  Blue/Yellow/Orange 

Total width …………………………………………………………….…………  1000 mm +/- 5 mm (Additional widths upon request)  

Total thickness (approx.)……………………………………………….…… 0,65 mm +/- 0,1 mm  

Material weight (approx.) ……………………………………..…………   220 g/m² +/- 10 g/m²  

Resistance to temperature, min. / max……………………….……  -30°C / +90°C  

Length per roll ………………………………………………………….………. 30 metres -0,0 m / +1% (Alternative make ups upon request)  

 

Attention 

Due to technical reasons the colour of the material or the printing may vary slightly from batch to batch 

Storage 

Cool and dry, protect against sunlight, use within 24 months after receipt.  

 

Physical Properties: (approx.) DIN Value Tolerance  

Burst pressure, max. Internal ……………………………………………………………………………………………... 3,0 bar  

Breaking load longitudinal PN EN ISO 527-3 450 N / 50 mm* …………………………………………….. 280 N / 50 mm

Breaking load lateral PN EN ISO 527-3 150 N / 50 mm* ……………………………………………………... 85 N / 50 mm

Extension break longitudinal PN EN ISO 527-3 50% ……………………………………………………………. 30%

Extension break lateral PN EN ISO 527-3 190%* ………………………………………………………………... 110%

Resistance to tearing longitudinal PN EN 12310-2 55 N / 50 mm* ……………………………………… 30 N / 50 mm

Resistance to tearing lateral PN EN 12310-2 150 N / 50 mm* ……………………………………………. 90 N / 50 mm

Resistance to water pressure PN EN 1928 (Version B) ……………………………………………………….. 1,5 bar  

UV-Resistance, min. PN EN ISO 4892-2 ………………………………………………………………………………. 450 h 

DEEP PRIMER PRO is a deep penetrating, water-based primer preparation intended for indoor building surfaces (regardless of the degree of moisture ) and exterior of buildings. Properly applied, it raises the adhesion, strengthening capacity and standardizes consistency & absorbency of the substrate, while not hindering the process of so-called "breathing ". Prevents discoloration and stains. Reduces wear of  topcoats.