Free Delivery

On all products

5kg STUCCOLIA Fine Finish Filler Crack Repair Acrylic Putty

  • Product Code: 5kg Stuccolia
  • Availability: In Stock
  • £24.99

PRODUCT DESCRIPTION

Stuccolia is a ready-to-use, acrylic, water-based putty, intended for levelling rough surfaces inside and outside: plaster, concrete, gypsum, wood and even metal surfaces, after prior anti-corrosion protection. Thanks to its plasticity, it is perfect for the renovation of monuments. During application, it is easy to model, and after drying, it has the appropriate hardness and durability.


Properties

- Contains water acrylic dispersion, natural mineral fillers and improvers,

- It is easy to spread over large surfaces, creating a smooth, hard, sandable layer,

- Compared to gypsum putties, it has: better adhesion to smooth surfaces, greater resistance to mechanical damage and provides wider possibilities in choosing a topcoat,

- It does not constitute a separate coat, surfaces covered with a layer of putty should be painted with an appropriate topcoat before being put into operation,

- Layer thickness 1-3 mm,

- Grain size 0-60 μm,

- It has the Hygienic Certificate of the National Institute of Hygiene (NIH-PZH) (product intended for filling surfaces and cracks outside of buildings and inside residential, public utility, health, storage and production rooms, including in the food industry - without direct contact with food).


Preparation

The surface to be putty should be thoroughly cleaned, loose pieces of paint and wallpaper removed, degreased and vacuumed,

Fresh cement-lime plaster can be put on only after 3-4 weeks of seasoning,

Metal surfaces should be primed with anti-corrosion paint,

Apply the mass on the prepared surface with a putty or a masonry trowel,

After drying, sand with sandpaper,

All types of emulsion, oil and phthalic primers and paints can be applied on the thoroughly dried and dust-free layer - it gives good adhesion to most topcoat paints